Step 1 - Choosing the graphics cards and components for your Mining Rig
To start with the assembly of a mining Rig, which possibly if you are a hobbyist you could build a cryptocurrency mining farm later on, although wait until you have enough experience in assemblies and installations, the first thing to do is to make a list of the material and make the purchases (try first with a mining Rig and if necessary, then buy the graphics cards and the necessary material to assemble more Rigs of the future farm).
The first step, then, will be to have the list of elements that make up a mining rig, These are:
Graphics cards, GPUs for mining
Power supply, PSU
Mainboard, SOCKET
RAM memory
SSD hard disk
Processor
Risers
Splitters
Rig metal structure with brackets
Wifi extension cable
Wireless USB
Table fan
With these elements we can get down to work, as you well know, the purchases of all the components are made in several different shops, because buying everything in the same shop will be quite complicated.
Our advice is to always use the same shops, even if they charge you a bit more, but you can be sure that they are trustworthy, that they process your order correctly and that the material is of high quality. Visit Amazon, Pc components, Coolmod and a few others, you will have more than enough to place your orders.
Step 2 - Have the rest of the components needed to assemble the crypto mining rig at hand.
Now, in order to run the Mining Rig, what nobody tells you is that you will need other elements that are part of the assembly / installation, without them you would not be able to boot any graphics card.
These elements forming part of the mining rig assembly are:
Screwdriver
HDMI cable
TV or computer screen with HDMI input
Computer keyboard for programming the motherboard Bios and the first graphics card
Socket extension in case the installation requires it.
Step 3 - Have a Cryptocurrency Wallet, the mining software configured and the mining pool selected.
Okei, you already have your components, but do youyou have set up your crypto wallet, for example in Coinex o BinanceDo you already have your configured mining software with the workers, so have you decided what you want to do? Mining pool you will use?
These are basic questions, because if you thought you could set everything up without creating your crypto wallet, you were very wrong, especially because Binance itself takes 1-3 days to validate your account.
On the other hand, be clear about what mining software you want to use, we as a company www.RigsMineria.com clearly use and recommend Hive Os
And if you have not yet opted for any mining pool, you will have to choose between Ethermine.org, Hiveon Pool, etc. depending on the cryptocurrency you are going to mine.
Step 4 - Assemble the Miner's Rig structure
From RigsMineria.com always proceed in the same way when assembling a Rig.
We take all the graphics cards out of each box, the same with the rest of the components, as it takes a little while between taking everything out of each box and leaving it on the table. Now the second step is to assemble the metal structure of the Rig, which normally takes 20 - 3o minutes between screwing everything together etc.
Step 5 - Connect the baseplate to the mining rig frame
Now it's time correctly positioned on the motherboard: the processor, RAM and SSD hard disk and leave it in the metal structure of the mining rig from the bottom.
Step 6 - Connect the power supply and a graphics card to the mining rig structure.
Now connect the power supply with cabling and a graphics card in the structure of the mining rig and connect the graphics card with a riser connected to the power supply.
Step 7 - Connect the wifi usb and extension cable to the mining rig structure.
We will take the wifi extension cable and usb, and plug it into the motherboard, protruding from the mining rig structure so that it is visible and the wifi can reach as far as possible.
Step 8 - Boot the motherboard and the graphics card (the one already positioned in the mining rig structure).
Then it's time to boot the system with the motherboard and modify its Bios and test that the graphics card does work in Hive OS and everything works perfectly. For a change, you will come across connection failures, wifis that barely emit a signal, graphics cards that don't start up on the first try, etc. Be prepared to be a good technical troubleshooter.
Step 9 - Connect the rest of the graphics cards and place them in the mining rig structure).
Now it's time to connect splitters, risers and power supply cables to the rest of the graphics cards and place them in the mining rig structure so that they are well assembled, normally they are tied together at the side where they are supported.
Now it's time boot up all GPUs to run on Hive OS and are visible in the software
Step 10 - Configure the graphics cards in Hive Os
We can now configure each graphics card by modifying its BIOS depending on temperature, fan speed, power consumption, memory clock and Core so that each GPU runs at maximum megahash performance in our mining pool.
We recommend Hiveon Pool if you were going to mine ETH simply to have both the software and the pool linked on the same channels
NOW THAT YOU KNOW HOW TO SET UP YOUR OWN MINING RIG, DO YOU KNOW THE PROFITABILITY OF MINING ETHERIUM AND ERGO?
https://www.rigsmineria.com/rigs-de-mineria-para-minar-etherium-y-ergo/
